Elasticized Asphalt

Choose from our recommended Grades below

650

Binder (Sealant)/Adhesive/Dipped Goods

650 is a high solid content (60%), anionic, aqueous dispersion of a medium-gel chloroprene polymer whose compounds provide excellent flexibility. It is a high solid version of 750. Its primary applications are Adhesives, Dipped Goods, and Sealant. It is also suitable for Coatings, Elasticized Asphalt and Foam applications. It has an extremely slow crystallization rate and very high tensile strength. Storage stability is good. pH decreases with time depending on temperature and air exposure. This decrease is indicative of structural changes in the polymer and alterations in the colloidal properties of the latex which are not readily measured. To keep changes to a minimum it is recommended that the material be stored low and temperatures between 5-40ºC, ideally between 13-21ºC with as little contact with air as possible.

DATA SHEET

PROPERTYVALUETEST METHOD
AppearanceLiquidVisual
ColourOpaque WhiteVisual
ContaminationNoneVisual
Solids % w/w59.0-61.0SN300 - 9000S
Gel ContentMedium-
pH at 25ºC12.0 min.SP320 - 3000S
Crystallization RateExtremely Slow-
PolarityAnionic-
Polymer StructureCopolymer-
Other CharacteristicsHigh solid version of 750.-
The above is typical data and it is not guaranteed by either Showa Denko or SEL.

APPLICATIONS

AdhesiveCoatingsDipped GoodsElasticized AsphaltSealant

Packaging & Storage

650 is packaged in 1,110kgs intermediate bulk containers and 225kgs plastic drums.

Product Safety

650 is classified according to Regulation (EC) No 1272/2008 as amended and it does not meet the criteria for classification according to this Regulation. Please contact us for further information and a copy of the Material Safety Data.

Compliance

654

Binder/Dipped Goods

654 is a high solid content (59%), anionic, aqueous dispersion of a low-gel chloroprene polymer. It has medium tensile strength and high elongation. Its main application is as a Binder (fabric impregnation). It is also used for Dipped Goods (household glove) where high elongation at break is primarily necessary. It has high contactability and it is also suitable for elastomer-based Adhesives. It has low crystallization rate and low modulus. It is a softer, stretchier and tackier version of 671A. It can also be used for Elasticized Asphalt. Storage stability is good. pH decreases with time depending on temperature and air exposure. This decrease is indicative of structural changes in the polymer and alterations in the colloidal properties of the latex which are not readily measured. To keep changes to a minimum it is recommended that the material be stored low and temperatures between 5-40ºC, ideally between 13-21ºC with as little contact with air as possible.      

DATA SHEET

PROPERTYVALUETEST METHOD
AppearanceLiquidVisual
ColourOpaque WhiteVisual
ContaminationNoneVisual
Solids % w/w58.0-60.0SN300 - 9000S
Gel ContentLow-
pH at 25ºC12.0 min.SP320 - 3000S
Crystallization RateLow-
PolarityAnionic-
Polymer StructureCopolymer-
Other CharacteristicsLow modulus.-
The above is typical data and it is not guaranteed by either Showa Denko or SEL.

APPLICATIONS

CoatingsDipped GoodsElasticized AsphaltFiber Binder

Packaging & Storage

654 is packaged in 1,110kgs intermediate bulk containers and 225kgs plastic drums.

Product Safety

654 is classified according to Regulation (EC) No 1272/2008 as amended and it does not meet the criteria for classification according to this Regulation. Please contact us for further information and a copy of the Material Safety Data.

Compliance

750

Adhesive/Binder/Dipped Goods

750 is a medium solid content (50%), anionic, aqueous dispersion of a medium-gel chloroprene polymer whose compounds provide excellent flexibility. Its primary applications include Dipped Goods (surgical gloves) as it provides excellent dexterity. It features excellent contactability (tackiness) with long open-time and it enables to lower level of tackifiers. It has  It is suitable for Adhesives (contact, pressure sensitive adhesives). It has an extremely slow crystallization rate, flex, excellent elasticity (soft), low modulus and very high tensile strength. It is also used as a Binder for non-woven fabrics. Other suitable applications include coatings, Elasticized Asphalt and PSA. Storage stability is good. pH decreases with time depending on temperature and air exposure. This decrease is indicative of structural changes in the polymer and alterations in the colloidal properties of the latex which are not readily measured. To keep changes to a minimum it is recommended that the material be stored low and temperatures between 5-40ºC, ideally between 13-21ºC with as little contact with air as possible.  

DATA SHEET

PROPERTYVALUETEST METHOD
AppearanceLiquidVisual
ColourOpaque WhiteVisual
ContaminationNoneVisual
Solids % w/w49.0-51.0SN300 - 9000S
Gel ContentMedium-
pH at 25ºC12.0 min.SP320 - 3000S
Crystallization RateExtremely Slow-
PolarityAnionic-
Polymer StructureCopolymer-
Other CharacteristicsFlex, excellent elasticity.-
The above is typical data and it is not guaranteed by either Showa Denko or SEL.

APPLICATIONS

AdhesiveCoatingsDipped GoodsElasticized AsphaltFiber BinderSealant

Packaging & Storage

750 is packaged in 1,110kgs intermediate bulk containers and 225kgs plastic drums.

Product Safety

750 is classified according to Regulation (EC) No 1272/2008 as amended and it does not meet the criteria for classification according to this Regulation. Please contact us for further information and a copy of the Material Safety Data.

Compliance

FDA regulations.

753

Dipped Goods/Adhesive/Binder

753 is a medium solid content (50%), anionic, aqueous dispersion of a medium-gel chloroprene polymer whose compounds provide excellent flexibility. One of its primary applications is Dipped Goods (surgical gloves). It has excellent elasticity (soft). It has low modulus at low elongation close to NR (RI) and it provides excellent dexterity. It is also suitable for Adhesive applications and Binder non-woven fabrics. It has a very low crystallization rate and it is accelerator -free (precured). It can be used in Coatings and Elasticized Asphalt applications. Storage stability is good. pH decreases with time depending on temperature and air exposure. This decrease is indicative of structural changes in the polymer and alterations in the colloidal properties of the latex which are not readily measured. To keep changes to a minimum it is recommended that the material be stored low and temperatures between 5-40ºC, ideally between 13-21ºC with as little contact with air as possible.  

DATA SHEET

PROPERTYVALUETEST METHOD
AppearanceLiquidVisual
ColourOpaque WhiteVisual
ContaminationNoneVisual
Solids % w/w49.0-51.0SN300 - 9000S
Gel ContentMedium-
pH at 25ºC12.0 min.SP320 - 3000S
Crystallization RateExtremely Slow-
PolarityAnionic-
Polymer StructureCopolymer-
Other CharacteristicsFlex, excellent elasticity with accelerator-free.-
The above is typical data and it is not guaranteed by either Showa Denko or SEL.

APPLICATIONS

AdhesiveCoatingsDipped GoodsElasticized AsphaltFiber BinderSealant

Packaging & Storage

753 is packaged in 1,110kgs intermediate bulk containers and 225kgs plastic drums.

Product Safety

753 is classified according to Regulation (EC) No 1272/2008 as amended and it does not meet the criteria for classification according to this Regulation. Please contact us for further information and a copy of the Material Safety Data.

Compliance